Ethylene glycol for chillers

Not Sure What You Nee Let Us Help. Free Application Assistance - Call Today! Ethylene glycol is an antifreeze product used in industrial glycol cooling equipment. Its primary use is in industrial cooling applications as freeze protection and rust inhibiting.

Percentage of glycol used can be determined by a location’s lowest outdoor ambient temperature and also the temperature of the process application loop.

EG is ideal for recirculation chillers and heaters, and has good rust inhibitors. Ethylene and Propylene are the two standard types of inhibited glycols that can be used in Koolant Koolers chillers. Purposes of glycol in Koolant Koolers chillers : The main job of glycol is to prevent freezing of the process fluid and ensure consistent flow at the operating temperature.

For this reason, it should not be used in potable water or food processing systems when leakage is a possibility. Using propylene glycol versus ethylene glycol is shown to decrease the water’s delta T across the chiller, which decreases the capacity and efficiency of similar chillers. Experiment To demonstrate these effects, an experiment was performed using the DAIKIN Coil Selection software.

Made to Empower Small Businesses. Compare Multiple Quotes from Top US Suppliers.

A chiller will run without glycol as long as the fluid temperature in the system is above freezing. Glycol or other inhibitors are recommended for most process cooling applications even if the fluid temperature doesn’t reach temperatures near freezing. Dowfrost is the Industrial Grade Propylene Glycol that we specify for use in our chillers. Martin said two basic types of glycol are used in chillers : ethylene and propylene.

They are available in temperature ranges of -degrees to 3degrees F (-degrees to 1degrees C) and work well for chiller applications, he said. With glycol in the system, chilled water is protected from freezing in the heat exchanger. This type of glycol can be used in any application where a low-toxicity content is not required. The average brewery will operate with a Glycol to Water Solution. Not enough glycol could lead to the system freezing up and possibly causing your chiller evaporator to rupture internally.

Sometimes the glycol is contained in a metal jacket, or cycles through a network of pipes. A common name for ethylene glycol is antifreeze. Propylene is non-toxic and food safe, prices are narrowing between propylene and ethylene so customers are choosing it more often. Glycol chillers come as high, medium, or low temperature chillers. Most glycol chillers use one of two components to carry out their cooling effects.

The first is ethylene glycol which is a colorless, odorless, low volatility liquid that does not contain any additives. Specially designed pump for glycol , this circulates the glycol through the chiller and out to the process.

Dowtherm and Dowfrost antifreeze is specially designed for process chiller systems. It is mainly used for two purposes, as a raw material in the manufacture of polyester fibers and for antifreeze formulations. There are two main types of glycol : propylene and ethylene.

The specifications determine the type of glycol (Propylene or Ethylene ), along with the blend ratio which is based on the glycol supply temperature as well as the winter ambient temperature. Trust the experience and industry expertise of Rapids to help you set up your long draw beer cooling system when your serving beer in a different place than your kegs are stored. Ethylene Glycol could potentially result in significant cost savings.

Warning: Do NOT use automotive anti-freeze in your chiller application. Chiller Systems and Glycol Usage. This will void the warranty and can cause severe damage to chiller components. Fast Delivery - Call Us Today! It is usually produced from either propylene oxide or glycerol.

EG is perfect for recirculation chillers and has good rust inhibitors. Large coolers for big industrial cooling projects. Our design team uses three different cooling technologies, depending on your needs. You can choose from ethylene or propylene glycol chillers , as well as standard water chillers. The glycol is an ethylene glycol blen without the silicone, and a full array of system corrosion and rust inhibitors.

Generally speaking, process chillers required to run fluid temperatures lower than 20°F, will require special refrigeration components to efficiently and reliably maintain design temperature required by the process. The range of Dow fluids includes inhibite ethylene glycol -based (EG) fluids, which are specified when maximum heat transfer efficiency and economy are essential, and inhibited propylene glycol based (PG) fluids for use when a low toxicity fluid is required. This system offers both flexibility and expandability for your home brewery. So, I see you are curious about glycol beer line chillers and glycol power packs.

In this video, Rapids beer expert Ben discusses the basics of long draw beer systems and glycol coolers with us. In HVAC, radiant heating, chillers , and solar thermal applications, propylene glycol (propane-2-diol) is used because it is non-toxic. Hydratech formulate and manufacture a wide range of glycol based heat transfer fluids that can also be classified as chiller- glycol. If the cold water temperature is lower than −°C, then a special pump needs to be used to be able to pump the high concentrations of ethylene glycol. Other important specifications include the internal water tank size and materials and full load current.

Whaley is a manufacturer of industrial brewery chiller systems. The brewery industry relies heavily on WPI for quality manufactured products such as glycol chillers , water chillers , glycol pump tank skids, brew-tank temperature control packages, brew-house control centers, and much more. In terms of efficiency losses, ethylene glycol has the least effect on flow rate, heat transfer capability, and pressure loss. Glycol cooling systems uses a self-contained system, to cool data centers.

Glycol is a mixture of water and ethylene glycol.